2-Panel Top Rail Arch
1-3/8″ Thick – Interior Door
2-PANEL TOP RAIL ARCH, Interior Door, 1-3/8″ Thick
Raised panel doors are built with frame and panel construction. The frame includes stiles (the vertical components of the frame) and rails (the horizontal components). Panels are the large, wider boards that fill the space between the stiles and rails. Panels fit into grooves in the frame components and help keep the door rigid. Our wood panels are raised (i.e., not on the same level or plane as the material around it) with a distinctive profile.
This 1-3/8” thick, 2-panel, top rail arch door is made in the U.S.A. at our northern Colorado factory. Our 1-3/8” thick doors are for Interior applications only—not for use as Exterior or “entry” doors. Our Knotty Alder lumber is sourced from responsibly managed forests in the western U.S.
Key elements of this door include:
An industry-leading Warranty is provided for this door, including one-year limited coverage on unfinished (raw) doors, and five-year limited coverage on factory pre-finished doors. Please note that this extended warranty applies only to the construction of the door, and not the factory pre-finish itself.
Engineered Stiles & Rails
Stiles and rails are the vertical and horizontal “frame” components, respectively, of the door. Our stiles and rails are engineered to resist bowing and warping. We use industry-leading 1/8″ thick veneers, with superior quality TimberStrand® Laminated Strand Lumber (LSL) core material. This door features a solid wood arched top rail (Top Rail Arch, or TRA).
Panels are the large, wider boards that fill the space between the stiles and rails. Our panels are solid wood (11/16” thick on this door)—much higher quality than pressboard panels with thin veneers, or hollow core panels found on lower quality imports. Panels are manufactured with small width boards, edge glued to create the larger width panel. Individual boards are random widths, glued in alternating grain patterns to balance the panel and reduce the natural tendency of the wood to warp or cup.
Bore & Dowel Construction
Our doors are assembled with bore and dowel construction. We use industry-leading 1/2″ diameter dowels. Stiles and rails are bored, glued, and then doweled for optimum strength and stability. Panels fit into grooves in the stile and rail components, and “float” on rubber spacers to allow for minor expansion and shrinking of the wood with the natural moisture and environmental changes of the home.
Panel & Sticking Profile
This door features a notched and gradual bevel panel profile and a beveled sticking profile as shown below. “Sticking” is the decorative trim wood placed between the stiles and rails and the panels of the door.